Top 10 typical forklift mishaps ， forklift operation ought to focus on these matters ！.

Don't ignore the forklift at the workplace. If the operation is not good, there will be major crashes in mins, and there are several crashes entailing forklifts.

Situation 1: The forklift cargo blocked the chauffeur's sight, and the person in front could not be located, leading to a rolling accident.
Case 2: In order to preserve the equilibrium of the forklift when raising hefty products, the employees used their body weight as the weight, which almost created casualties.
Instance 3: The width of the forklift freight surpasses the permitted width of the route and holds on the roadside shelf, which practically causes an crash.
Instance 4: Forklift is speeding up and rolls over throughout a turn.
Situation 5: The forklift chauffeur did not discover the pedestrian, and the pedestrian did not notice the forklift.
Instance 6: The forklift raises the workers illegally, the forklift driver does not put on the seat belt, the forklift lifter drops and the chauffeur is squashed when the forklift rolls over.
Situation 7: The forklift chauffeur did not put on a seat belt and dropped from the automobile when it rolled over and was squashed.
Forklift operation need to take notice of these matters ：.

Begin.
1. Before beginning, observe the surroundings, and after verifying that there are no obstacles that impede the safety and security of driving, honk the horn initially and then begin.
2. For vehicles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic stress ( atmospheric pressure) gauge should be secure prior to beginning.
3. When the forklift starts with a tons, the vehicle driver ought to initially validate that the load is steady and reliable.
4. The start needs to be slow-moving and constant.

Driving.
1. When driving, the elevation in between the bottom end of the fork and the ground should be kept at 300mm-400mm, and the mast ought to be tilted backwards. .
2. Do not raise the fork expensive when driving. When entering and leaving the work site or while driving, be careful that there will be no obstacles in the sky. When the lots is traveling, the fork needs to not be increased too expensive, which will impact the stability of the forklift. .
3. After unloading, the fork should be lowered to the regular driving placement prior to driving. .
4. When transforming, if there are pedestrians or lorries close by, the driving signal should be issued first. High-speed sharp turns are prohibited. High-speed sharp turns will create the lorry to shed lateral security and tip over. .
5. When the forklift is downhill, it is strictly forbidden to turn off the fire and slide, and it is restricted to brake instantly while driving with lots unless there are unique conditions.
6. When the forklift is running, it has to comply with the website traffic rules in the manufacturing facility and should maintain a certain safety and security range from the car ahead. .
7. When the forklift is running, the tons must be in the most affordable position that does not impede the driving, and the gantry should be effectively slanted back. The load will not be elevated except when piling or loading. .
8. The elevation of the lots should not obstruct the chauffeur's view. In special scenarios, when the thing impacts the forward vision, drive at a reduced speed when turning around.
9. It is restricted to turn on the ramp, nor to drive throughout the ramp. .
10. The risk-free driving rate of the forklift in the manufacturing facility area is 5 km/h, and it needs to drive securely at a reduced speed when going into the manufacturing workshop area. .
11. When the forklift is lifted, lifted or driven, it is prohibited for employees to stand on the fork to hold products and play a stabilizing duty. .
12. If problems are found, they will be repaired and reported in a timely fashion, and they will certainly never ever run with diseases or conceal them.

loading Electric Forklift Truck for Warehouse and discharging.
1. When fork-loading things, the range in between both forks need to be readjusted as required to make the load of both forks well balanced and not skewed, and one side of the product ought to be against the rack. .
2. It is prohibited to work with a single fork or utilize a fork top or pull. In unique situations, safety and security indication must be set up to advise bordering pedestrians. .
3. In the process of loading and dumping products, the forklift must be stopped with the brake. .
4. The speed of the automobile ought to be slow-moving and consistent. Be careful not to roll the wheels on the dunnage, so as not to extend the rolled objects and harm people. .
5. When utilizing a fork to fork the goods, the fork should be as deep as possible under the lots, and it ought to be kept in mind that the fork suggestion need to not touch other products or objects. The lots ought to be maintained with minimal back tilt of the gantry to make sure that the load does not move in reverse. The mast can be tilted onward slightly when the tons is decreased to allow for simple positioning of the lots and extraction of the forks. .
6. It is prohibited to fork items at high speed and hit difficult things with the fork head. .
7. When the forklift is working, it is prohibited for individuals to loaf the fork, so regarding avoid the collapse of the goods and harm individuals. .
8. Straining is prohibited, and it is forbidden to make use of forks to raise personnel to participate in high-altitude procedures to prevent high-altitude dropping crashes. .
9. It is not allowed to use the brake inertia to slip, put, round or roll items. .
10. It is not permitted to make use of forks to select, turn pallet unload.

Leaving .
1. It is forbidden to leave the forklift when the products on the fork are in the air. Before leaving the forklift, you need to discharge the goods or reduced the fork structure.
2. Draw the hand brake take care of to dead or dispirit the hand brake button.
3. The engine is switched off and the power is removed. (Except for unique scenarios, such as the vehicle driver does not leave the lorry's line of sight and does not go beyond 1 min).
4. Get rid of the trick. .

Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the appearance ought to be inspected, and fuel, lubricating oil and air conditioning water need to be included.
2. Inspect the security performance of starting, running and braking.
3. Examine whether the lights and horn signals are full and efficient.
4. During the operation of the forklift, check whether the stress and temperature level are typical.
5. After the forklift is running, the external leakage needs to additionally be inspected and the seals must be replaced in time.

Forklift Safety Operation Specifications.
1. You must examine prior to leaving the cars and truck;.
2. When you come across someone before you throughout driving, you ought to send a signal at a distance of 5 m;.
3. The driving rate in the factory does not exceed 5 km/h;.
4. When driving, the nadir of the cargo should be 0.3 m ~ 0.4 m in the air;.
5. The turning need to not be as well sharp to avoid the propensity of " complimentary turning";.
6. Adding and down the slope should be slow-moving and uniform, and no activating the slope is permitted.
7. Do not drive throughout the gradient. When the slope is greater than 10%, the lorry ought to be driven in reverse when declining;.
8. When the forklift personnel bring the goods and move forward, if they encounter huge or heavy items and go to the motorist's line of sight, they need to take the reversing workout
.
The "Eight Prohibitions" should be complied with in the procedure.
1. Single fork procedure is not allowed.
2. It is not enabled to raise the goods for far away driving.
3. It is not permitted to pick up the goods by handing over the pallet with the fork.
4. It is not permitted to directly shovel chemicals, flammables and various other unsafe chemicals with forks.
5. It is not allowed to utilize inertia pressure to pick up the goods.
6. It is not enabled to make use of braking force to expatriation round or easy-to-roll things.
7. It is not allowed to bring individuals to work with the pallet or fork, and it is strictly prohibited to stand under the fork after the fork is increased.
8. Do not drive side to side on slopes
.
Auto parking is not allowed under the following conditions.
1. Curves, slim roadways, train crossings;.
2. Sections with a longitudinal slope higher than 5%.
3. When there is an barrier on one side of the roadway, the contrary side of the section Electric Forklift Truck for Warehouse with the same length as the challenge must be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844